👀 New year 2019 project Remote Control pouch
New remote control pouch #3 for Fan Control module (Panasonic Ceiling Fan) model F-M15E2, F-M14E2.
 |
| Use paper as template and draw outline for project. |
 |
| Cut veg tan for project |
This is a simple project and it easy to make
from Veg Tan leather
Cut a hard paper backing for the base. Draw an outline of project and cut with scissor.
After apply glue.
Use roller over paper surface to better
and even adhesion.
Work in progress . . .... please stay tune and more update as we progress..
Update on 2nd Jan 2019
Another view angle.
It important to use ruler for alignment
and ensure it cut a straight line.
See photo, ruler edge is use as a guide for both round hole are tangent.
overall view of the pattern
Close up view, top portion.
Close up view, bottom portion.
Use a special "Scissor" to access limited space for the needle to do stitching.
Tips: use longer thread for this method to allow the top and bottom cover to have space to make
stitching easier.
Step by step on how to do stitching
Pull the thread tight.
Once the last step is done is to terminate the thread.
Finish project for remote control casing. 😉 Happy New Year 2019
👴End of document.
Cut a hard paper backing for the base. Draw an outline of project and cut with scissor.
After apply glue.
Use roller over paper surface to better
and even adhesion.
 |
| Use punch to mark round corner to cut off |
 |
| Cut side corner with sharp knife |
 |
| Led sensor port hole |
 |
| Cut corner with ruler to aid and align position on both side |
Work in progress . . .... please stay tune and more update as we progress..
Update on 2nd Jan 2019
 |
| Mark position for led lens port hole |
 |
| create mark with round punch |
Another view angle.
It important to use ruler for alignment
and ensure it cut a straight line.
See photo, ruler edge is use as a guide for both round hole are tangent.
overall view of the pattern
Close up view, top portion.
 |
| Cut plastic window |
 |
| Affix plastic window on inner leather |
 |
| How stitch cover |
 |
| one method to stitch the side panel |
Use a special "Scissor" to access limited space for the needle to do stitching.
Tips: use longer thread for this method to allow the top and bottom cover to have space to make
stitching easier.
Step by step on how to do stitching
Pull the thread tight.
Once the last step is done is to terminate the thread.
Finish project for remote control casing. 😉 Happy New Year 2019
👴End of document.
No comments:
Post a Comment