👉 Tote bag #3 Part three (Kid bag)
This is how to take care and handle long leather material for making rolled /tubular handle.
It is about 50 cm to 68 cm length of material. This is dependent on the tote bag handle design type and user requirement. So to speak ergonomically customize and tailor for each individual body specification.
This is the best practice and way to cut big leather raw material for making tote bag handle.
Where space is limited and table top size is restricted for movement of material.
It require minimum space and use a long plywood to hold roll of leather.
Plywood is support by a wooden stool or any support item available to provide as alternative chair or stool.
Do take note when cutting long length it is very challenging as leather are soft like cloth and it can move around and reshape during the cutting process.
Cutting these type of leather it at time consume time and have to be very patience at all time. It best like recommend by professional to trim their nail short before start working on leather material. As some leather surface is very susceptible to small scratch mark if not handle with care.
Draw a centerline on leather to better align the rope position, it also to check the required rope length.
Be to continue... please stay tune and surf and browse other project of your interest. ✋ Any comment or suggestion please add comment.. Thank you.👌
Update on 21st Jan 2019,
Continue with making the rolled/tubular handle, today the material use for handle is thinner. Purchase from a shop in Pintal Tali - Luen Wah (please refer to previous post).
Manage to purchase more punch, beveler #2 size and other thread material.
Tools use for making this rolled/tubular handle.
Certain part of the handle need to skive down to required thickness. The part which meet the rope end.
More update coming up... stay tune.
This is how to take care and handle long leather material for making rolled /tubular handle.
It is about 50 cm to 68 cm length of material. This is dependent on the tote bag handle design type and user requirement. So to speak ergonomically customize and tailor for each individual body specification.
This is the best practice and way to cut big leather raw material for making tote bag handle.
Where space is limited and table top size is restricted for movement of material.
It require minimum space and use a long plywood to hold roll of leather.
Plywood is support by a wooden stool or any support item available to provide as alternative chair or stool.
Do take note when cutting long length it is very challenging as leather are soft like cloth and it can move around and reshape during the cutting process.
Cutting these type of leather it at time consume time and have to be very patience at all time. It best like recommend by professional to trim their nail short before start working on leather material. As some leather surface is very susceptible to small scratch mark if not handle with care.
Draw a centerline on leather to better align the rope position, it also to check the required rope length.
Be to continue... please stay tune and surf and browse other project of your interest. ✋ Any comment or suggestion please add comment.. Thank you.👌
Update on 21st Jan 2019,
Continue with making the rolled/tubular handle, today the material use for handle is thinner. Purchase from a shop in Pintal Tali - Luen Wah (please refer to previous post).
Manage to purchase more punch, beveler #2 size and other thread material.
Tools use for making this rolled/tubular handle.
Certain part of the handle need to skive down to required thickness. The part which meet the rope end.
More update coming up... stay tune.
End of document 👴
No comments:
Post a Comment