This is non leather repair work.
Encounter problem with key chain design that need improvement after using it. The issue here is the key keeps dropping out.
Hence decided to add a small flag to minimize key from dropping out
Use this type of tool (lock stitch sewing awl) for simple repair work. Trying it out this for the first time.
👀*note:- it is available on line or can be purchase from a local leather shop in Penang.
This is how to assemble the various part from the kit supplied part.
✌*note:- you will need a stitching awl to help in repair. It make life easier when you start repair work.
Install spool of thread for Lock stitch sewing awl.
*note:- the thread supplied when new with spool are available to purchase. But once the thread is finish you if could either buy a new spool come complete with thread (limited colour thread).
However you can easier and cheaper to refill the empty spool.
After insert one end thread from spool thru the head tunnel and thru the needle, Note this needle have a special groove channel for needle point.
This is how the thread is pass thru and once tighten the head nut we are ready to use it.
This is how the thread loop is created and insert another thread and continue from here onward.
This is how leather is pre punch hole in preparation for Lock stitch sewing awl.
👴 End of document
Encounter problem with key chain design that need improvement after using it. The issue here is the key keeps dropping out.
Hence decided to add a small flag to minimize key from dropping out
Use this type of tool (lock stitch sewing awl) for simple repair work. Trying it out this for the first time.
👀*note:- it is available on line or can be purchase from a local leather shop in Penang.
This is how to assemble the various part from the kit supplied part.
✌*note:- you will need a stitching awl to help in repair. It make life easier when you start repair work.
Install spool of thread for Lock stitch sewing awl.
*note:- the thread supplied when new with spool are available to purchase. But once the thread is finish you if could either buy a new spool come complete with thread (limited colour thread).
However you can easier and cheaper to refill the empty spool.
After insert one end thread from spool thru the head tunnel and thru the needle, Note this needle have a special groove channel for needle point.
This is how the thread is pass thru and once tighten the head nut we are ready to use it.
 |
| Show how a loop is created when the needle is pull away movement. |
This is how the thread loop is created and insert another thread and continue from here onward.
This is how leather is pre punch hole in preparation for Lock stitch sewing awl.
👴 End of document
No comments:
Post a Comment