Non leather repair #3

 Try repair granddaughter shoe.
          Shoe in sole and out sole peeling off.

Need to strip overall 1) insole and 2) out sole for a more complete repair, cleaning  parts and apply gule.

This is how it looks like when first receive.

Both shoe have similar defect, not sure why it happen.

There could be several factors (express in my opinion only)
a) Poor quality glue, viewing the old glue mark on the two surface indicate one possible reason
b)  Curing time, insufficient force during or dirty surface


Remove outer sole from base to check is there other layer need to re-apply fresh glue with hardener chemical.


totally remove the outer sole with rubber sole.











This is very good chemical to add for repair shoe. This hardener mix with contact cement. Just need a tiny drop.
It best to a have small surface to hold glue and add just a tiny drop and it will cure is 10 minutes and very hard binding action.
If done correctly it is almost impossible to rip the joint apart


    End of Document 👴

No comments:

Falcon A1 Pro software testing Material - Falcon A1 Pro ソフトウェアテスト資料

One important step to verify the material used verus speed and power setting are matching or not. 使用されている材質と速度および電力設定が一致しているかどうかを確認することが重要なス...