Leather Tools and Tips #7

          Leather tools and tips #7.
        👂 Sharing tool project and sheath for own tool

                 This project is to protect tool and simple tool  👀

✌ Fabricate own tools and sheath for leather tool.

1) Use jean material "rough" surface for burnishing edge
2) Sheath for thread trimmer/ cutter

Use scrap jean material as tool
for burnishing.

Use a 1/2 inch pvc plastic pipe as handle. Sew jean material on to pvc pipe.

Sew the edge to warp
around the pipe

This how the tool is use

Another burnishing tool but use a smaller diameter wooden rod.

Sew edge to warp material on
wooden rod.

   

Punch hole for handle

Sew handle edge together

1) Middle top object is sheath project for trimmer /cutter tool.
2) Extreme left is a 1/2 inch pvc with jean cloth wrap around as burnishing.
3) On right side is a wooden rod with jean cloth wrap around.

☺ Another project is protect punch set sheath

Use scrap leather for this project.

Sheath for two prong punch

sheath for four prong punch

Added additional layer for this
four prong punch.






Happy ☺enjoy simple projects.

Update 8th May 2020.
Have make changes to suit needs for this tool sheath. Always looking for improvement to tools sheath.

            👴 End of document 👴