This project was pending since late Step 2018.. now continue with repair.
The seat was broken, the cross bar is broken.
Join a few plank for the seat, then next step cut to shape and size for stool
Cut the sharp corner and user sander to round off the corner and the edge.
Use rubber glue
Use paper to trace the four leg position
Check size of new seat against old chair seat to ensure it match and not over size or under size.
Attach paper mask to pick the chair led position for hole
Joint wood and cut to required size and proceed to sandpaper and sealant for gap between joint
slowly peel off paper mask fromo old chair seat
slowly remove double sided tape from old chair seat
Remove paper mask template with
position of the hole for chair leg
Work in progress.. please stay tune
End of Document π΄
The seat was broken, the cross bar is broken.
Join a few plank for the seat, then next step cut to shape and size for stool
Cut the sharp corner and user sander to round off the corner and the edge.
Use rubber glue
Use paper to trace the four leg position
Attach paper mask to pick the chair led position for hole
Joint wood and cut to required size and proceed to sandpaper and sealant for gap between joint
slowly remove double sided tape from old chair seat
Remove paper mask template with
position of the hole for chair leg
Work in progress.. please stay tune
End of Document π΄
No comments:
Post a Comment