UK house, repair leaking gutter - イギリスの住宅、雨漏り雨樋を修理

Note:- work in progress, stay tune and thanks for viewing this blog spot. 注: - 作業は進行中ですので、しばらくお待ちください。このブログスポットをご覧いただきありがとうございます。


This is a house in UK at HULL, notice the external wall at rear with leaking gutter for upper level. This resulted in the kitchen glass outside of window dirty surface , water mark , splashing water on floor and hence need to clean and scarping window surface more often.

The challenge is find the correct pipe accessories to match the original.

Then decide to use a long canvas material to act a temporary gutter until a more permanent repair to gutter

これは英国のハルの家です。後部の外壁に上部の雨樋が漏れていることに注目してください。 その結果、窓の外側のキッチンのガラスの表面が汚れ、水跡ができ、床に水が飛び散るため、窓の表面をより頻繁に掃除したり削ったりする必要がありました。

課題は、オリジナルと一致する適切なパイプ アクセサリを見つけることです。

次に、雨樋をより永続的に修理するまで、長いキャンバス素材を一時的な雨樋として使用することにします。

Before use of canvas, have tried use cardboard and heavy duct tape and apply and use recycle plastic strap for better support on the edge and use leathercraft thread to hold as support.

Since the new gutter need install on wall hence buy steel nail to attached. Also use of canvas strap to act as support to hold the base of cardboard to wall.

キャンバスを使用する前に、厚紙と厚手のダクトテープを使用し、エッジをよりよくサポートするためにリサイクルプラスチックストラップを適用して使用し、サポートとして保持するためにレザークラフト糸を使用してみました。

新しい雨樋を壁に取り付ける必要があるため、取り付けるためのスチール釘を購入します。 また、キャンバスストラップを使用して、ボール紙のベースを壁に固定するためのサポートとして機能します。

As can be seen from photo, the gutter pipe and joint are very weak, crack, brittle, hence slowly try replacing various part of broken pipe and joint in phase. Use this repair as not too familiar with UK pipe type and size and costing.

However manage to salvage some throw away pipe and buy some materials from car boot sale.

写真からわかるように、雨樋のパイプとジョイントは非常に弱く、ひび割れ、脆くなっています。したがって、破損したパイプとジョイントのさまざまな部分を段階的にゆっくりと交換してみてください。 英国のパイプの種類、サイズ、および費用についてあまり詳しくない場合は、この修理を使用してください。

しかし、捨てられたパイプをなんとか回収し、車のトランクセールで材料を購入しました。


Go to hardware shop at HULL  ( Chanterlands DIY & Hardware), they have limited parts on hand, the owner was kind enough to suggest try other hardware outlet within HULL area.
Since there are some many type and variety of piping size, shape, design , material, interlocking version and wide selection to choose and match old and new materials.
HULL のハードウェア ショップ (Chanterlands DIY & Hardware) に行きます。手持ちの部品には限りがあります。オーナーは親切にも、HULL エリア内の他のハードウェア アウトレットを試してみることを提案してくれました。
配管のサイズ、形状、デザイン、材質、インターロッキングバージョンなどの種類が豊富にあり、新旧の材質に合わせて選択できる幅広い選択肢があります。





First attempt was to try apply whatever type sealant or water proof  material to seal whatever the area with leakage.
I was wrong in this approach was because the pipe was old and wear and tear does not work in this case or situation. 

最初の試みは、漏れのある領域をシールするために、あらゆるタイプのシーラントまたは防水材料を適用してみることでした。
このアプローチが間違っていたのは、パイプが古く、この場合や状況では磨耗が機能しないためです。





Looking into other alternative method was beside using sealant, use duct tape to hold certain parts but it does not work this way too.
Have to think and keep to look for other way to temporary fix the issue.
他の代替方法を検討すると、シーラントを使用する以外に、特定の部品を固定するためにダクトテープを使用することもありましたが、この方法でも機能しません。
問題を一時的に解決するための他の方法を考え、探し続ける必要があります。


 Close up view on the joint and it does not looks any better. Then another approach was to ask around and check on internet for looks for alternative solution.
接合部を拡大して見ると、見た目はそれほど良くありません。 もう 1 つのアプローチは、周囲に尋ねたり、インターネットで別の解決策を探したりすることでした。
 

Take measurement and examine closely the T joint type , size and shape.
T ジョイントの種類、サイズ、形状を測定し、詳しく調べます。

Take measurement on the joint area.
関節部分を測定します。


Take some measurement on the pipe length.
パイプの長さを測定してください。

Still leaking but the method use was not very good way, so back to drawing board..💭💭

まだ漏れていますが、使用方法があまり良くなかったので、振り出しに戻りました。






































Safety first and take a few hour learning how to operate this ladder.  




This method still have some weakness on the wall outlet is crack line on plastic pipe. Using the sealant is not an effective repair. Next phase is partial pipe replacement.. Stay tune to more technique in repair..o/k?

この方法では、壁のコンセントにプラスチックパイプのひび割れが発生するという弱点がまだあります。 シーラントを使用しても効果的な修理はできません。 次の段階は部分的なパイプの交換です。修理のさらなるテクニックに注目してください。o/k?





* Note: This is trail use of "Google Translate" application from ENGLISH to JAPANESE, sorry if this translation do not make sense or suitable word or sentence, please do let me know and thank you.

* 注: これは英語から日本語への「Google 翻訳」アプリケーションの試用です。この翻訳が意味をなさない、または適切な単語や文でない場合は、申し訳ありませんが、お知らせください。ありがとうございます。

                                          👤     End of  document   👨







Install DYSON vacuum and accessories holder - DYSON掃除機とアクセサリーホルダーを取り付けます

 This is one project at UK home, it is to organize a holder for Dyson vacuum cleaner and it accessories.

DYSON掃除機とアクセサリーホルダーを取り付けます

Trying to maximize space and allow user with user friendlier location, found a good location within the kitchen area. There is a empty space close by to house heater unit.

スペースを最大限に活用し、ユーザーが使いやすい場所に配置できるようにするために、キッチンエリア内の良い場所を見つけました。 ハウスヒーターユニットの近くに空きスペースがあります。


Various type accessories which need to hold and keep in position but easy to retrieve.
保持して所定の位置に保つ必要があるが、簡単に取り出すことができるさまざまなタイプのアクセサリ。

The challenges is to mount the round hose accessory, try use an empty silicone tube to engage .

課題は、丸いホース アクセサリを取り付けることです。空のシリコン チューブを使用して接続してみてください。






To try out various location and position for mounting the vacuum cleaner charger station. It have to close to where the power strip for charger module is located.

Have sufficient allowance for ease to retrieve and return to charger station.

掃除機の充電器ステーションを取り付けるためのさまざまな場所と位置を試します。 充電器モジュールの電源タップが配置されている場所の近くにある必要があります。

充電器ステーションへの取り出しと返却を容易にするために、十分な余裕を持たせてください。












Try out various method and material to hold accessories for Dyson vacuum cleaner. 

ダイソン掃除機のアクセサリーを固定するためのさまざまな方法と素材を試してください。


* Note: I am trying use "Google Translate" application from English to Japanese, sorry if this translation is not suitable please do let me know and thank you.

* 注: 英語から日本語への「Google 翻訳」アプリケーションを使用しようとしています。この翻訳が適切でない場合は、申し訳ありませんが、お知らせください。ありがとうございます。

                                          👤     End of  document   👨

Tools Hack Saw Blade - 工具 金鋸刃

  This simple tool is useful when performing work related to plumbing for example a situation for the pipe to cut is too restrictive (block by  design ) at site for cutting pipe to size.

A time saver in certain application for cutting pipe with limited space.

It is just a hack saw blade and add a handle.

このシンプルなツールは、配管に関連する作業を実行する場合に役立ちます。たとえば、現場でパイプをサイズに合わせて切断するのにパイプの切断が制限されすぎる状況(設計によりブロックされている)などです。

限られたスペースでパイプを切断する特定の用途での時間を節約します。

金ノコの刃にハンドルを付けただけです。

 Beside for plumbing it is tools for wood work, leathercraft, metal work.. it is universal apply for whatever application.

配管以外にも木工、革細工、金属加工などあらゆる用途に使える万能ツールです。


A few method and different material for various type of handle, PVC pipe, aluminum tube, roller paper, cable rubber insulation from power cable, or could a wood dowel. Any or whatever scrap material is possible as long it able to grip hack saw blade in position.

ハンドル、PVCパイプ、アルミチューブ、ローラーペーパー、電源ケーブルのケーブルゴム絶縁体、または木ダボなど、さまざまなタイプのハンドルにいくつかの方法と異なる材料を使用できます。 弓のこ刃を所定の位置にグリップできる限り、どのようなスクラップ材料でも使用可能です。



The stem handle like a throw away motor bike rubber handle. It have the grip function and hand protection it offer.
使い捨てバイクのゴムハンドルのようなステムハンドル。 グリップ機能と手の保護機能を備えています。

The middle saw uses an old aluminum tube, the one on the right uses a an old poly pipe.
中央の鋸は古いアルミチューブを使用し、右側の鋸は古いポリパイプを使用します。



For the motor bike handle to give a better support to hold the hacker saw blade. In this case we have first install saw blade into a roller tube and then insert into rubber bike handle.
バイクのハンドルがハッカーソーの刃を保持するためのサポートを強化します。 この場合、最初に鋸刃をローラーチューブに取り付けてから、ゴム製のバイクハンドルに挿入します。





This is to show how to ensure the hack saw blade do not dislodge and held in place with use of cable tie or any strong material to loop over the hole of hack saw.

これは、弓のこ刃が外れないことを確認し、ケーブルタイまたは弓のこ穴にループを付ける強力な素材を使用して所定の位置に保持する方法を示しています。

* Note: This is trail use of "Google Translate" application from ENGLISH to JAPANESE, sorry if this translation do not make sense or suitable word or sentence, please do let me know and thank you.

* 注: これは英語から日本語への「Google 翻訳」アプリケーションの試用です。この翻訳が意味をなさない、または適切な単語や文でない場合は、申し訳ありませんが、お知らせください。ありがとうございます。

                                          👤     End of  document   👨

Restore PARANG / Bush knife - レストアパラン / ブッシュナイフ

        This project is to built a new parang sheath for a friend. The original👱 sheath was old and some part is broken and need repair / or fabricate a new leather sheath. It is also an opportunity to restore the "parang" to it original shape.

このプロジェクトは、友人のために新しいパラン シースを構築することです。 オリジナルの👱シースは古く、一部が壊れているため、修理/または新しい革シースを作製する必要があります。 また、「パラン」を元の形状に戻す機会でもあります。

The project I enjoy most is to put my leathercraft to test and also learn how to restore the "old parang" to test.

私が最も楽しんでいるプロジェクトは、自分の革細工をテストし、テストのために「古いパラン」を修復する方法を学ぶことです。

Notice the cutting edge was blunt /dull, rusty, the head/spine edge was rough, uneven and dented due to extended use.


Background information - 背景情報 -

The parang has three different edges: the front is very sharp and used for skinning, the middle is wider and used for chopping, and the back end (near the handle) is very fine and used for carving. A parang handle is normally made out of wood or horn, with a wide end to prevent slips in wet conditions.

 The parang (/ˈpɑːrɑːŋ/) is a type of knife used across the Malay archipelago.[1][2]

 [1]Donn F. Draeger (1992). Weapons and fighting arts of Indonesia. Rutland, Vt. : Charles E. Tuttle Co. ISBN 978-0-8048-1716-5.

 [2]Albert G Van Zonneveld (2002). Traditional Weapons of the Indonesian Archipelago. Koninklyk Instituut Voor Taal Land. ISBN 90-5450-004-2.


パランには 3 つの異なる刃があります。前部は非常に鋭く、皮を剥くのに使用され、中央は幅が広く、刻むのに使用され、後端 (ハンドル近く) は非常に細かく、彫刻に使用されます。 パランハンドルは通常、木や角で作られており、濡れた状態での滑りを防ぐために幅広の端が付いています。

  パラン (/ˈpɑːrɑːŋ/) は、マレー諸島全域で使用されるナイフの一種です。[1][2]。

  [1]ドン F. ドレーガー (1992)。 インドネシアの武器と格闘技。 バーモント州ラトランド:Charles E. Tuttle Co. ISBN 978-0-8048-1716-5。

  [2]アルバート・G・ヴァン・ゾンネフェルト (2002)。 インドネシア諸島の伝統的な武器。 フォール・タール・ランドのコニンクリク研究所。 ISBN 90-5450-004-2。


https://www.myparang.com/

https://www.myparang.com/articles-3/




AFTER Repair on parang


Parang and sheath weight is about 640.0 gm
Sheath weight is 110.0 gm
 

Parang weight is 530.00 gm


Parang  (tips to handle ) length is 45.0 cm 
and sheath length is 36.0 cm. パラン(柄の先から柄まで)の長さは45.0cm 
シースの長さは36.0cmです


Check on width of blade at this location.
Approximate height of heel. かかとの高さの目安。

Approximate length of handle. ハンドルの長さの目安。

Measurement for the spine is about 3.9 mm. 
The spine was "hammered" until it mushroom and it was grind and filed to smoothen the edge. 背骨の寸法は約3.9mmです。 
背骨はきのこ状になるまで「ハンマーで叩き」、エッジを滑らかにするために研磨してやすりをかけた。

 

Measurement for the spine is about 3.8 mm. 背骨の寸法は約3.8mmです。


Measurement for the spine is about 3.7 mm. 
背骨の寸法は約3.7mmです。


Measurement for the bolster is about 25.1 mm.

ボルスターの寸法は約 25.1 mm です。


Check on handle shape and size. The handle was loosen (the nut was damaged) and was repaired by a friend who have the tools and experience. ハンドルの形状とサイズを確認してください。 ハンドルが緩んでいた(ナットが破損していた)ので、工具と経験のある友人に修理してもらいました。







Fabricating sheath  ( work in progress  please stay in tune)

 シースを製作中 (作業は進行中ですので、しばらくお待ちください)。

The first step in this case is to trace the outline of the original sheath shape and pattern. Or another way is to trace the shape of the parang and add seam allowance. この場合の最初のステップは、元のシースの形状とパターンの輪郭をトレースすることです。 または、パランの形をなぞって縫い代を付ける方法もあります。

To trace the original sheath design and shape of parang. the inside of sheath had added a polyester lining protect the leather sheath surface.

パランのオリジナルのシースのデザインと形状をトレースします。 シースの内側には、レザーシースの表面を保護するポリエステルの裏地が追加されています。

Final check on sheath. 外装の最終チェック。


= - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = -

Resource and information

https://www.youtube.com/watch?v=ofOQy-dMIgo

Bidor Golok Perak Review, Amazing Blade of Malaysia! With MyParang.com Handle

WeAllJuggleKnives            5,714 views  15 Jul 2022             (7:29 minutes)

= - = - = - = - = - = - = - = - = -

= - = - = - = - = - = - = - = - = -

https://knifeaid.com/blogs/knife-mastery/anatomy-of-a-knife

 = - = - = - = - = - = - = - = - = -- - - - - - - - - 

* Note: This is trail use of "Google Translate" application from ENGLISH to JAPANESE, sorry if this translation do not make sense or suitable word or sentence, please do let me know and thank you.

* 注: これは英語から日本語への「Google 翻訳」アプリケーションの試用です。この翻訳が意味をなさない、または適切な単語や文でない場合は、申し訳ありませんが、お知らせください。ありがとうございます。

                                          👤     End of  document   👨

If you have any comments or suggestion you are most welcome, please share with us. Learning experience is that the different sharpening angle for parang.

ご意見やご提案がございましたら、ぜひお知らせください。 学習経験は、パランの研ぎ角度の違いです。

                                                

Modify key fog / holder of leather and canvas - レザーとキャンバスのキーフォグ/ホルダーを改造

 Got a special request to make a simple key fog / holder easy to retrieve and return into bag.

レザーとキャンバスのキーフォグ/ホルダーを改造

The original key fog is a strip of leather riveted at one end and loop back, see the original design below.

オリジナルのキーフォグは、一端がリベットで留められ、ループバックになっている革のストリップです。以下のオリジナルのデザインを参照してください。


Close up view for one side , it have center strip for ID purpose.

片側の拡大図。ID 用のセンターストリップが付いています。

Close up view for the other side.

反対側の拡大図。






  Work in progress, please stay tune

現在作業中です、しばらくお待ちください


* Note: I am trying use "Google Translate" application from English to Japanese, sorry if this translation is not suitable please do let me know and thank you.


* 注: 英語から日本語への「Google 翻訳」アプリケーションを使用しようとしています。この翻訳が適切でない場合は、申し訳ありませんが、お知らせください。ありがとうございます。

                     END of document  👲

                     文書の終わり 👲






Non Leather Project Table surface extension - ノンレザー・プロジェクトテーブル用天板拡張パーツ

 Was looking for a solution to extend the table stop just for eaiser to eat, as the user using a wheel chair and there is a wide gap bewteen...