Repair Shoe of spouse

    This is a shoe / slipper repair for both slight wear and tear at heel area ( mainly the worn off is at the edge of heel) . 

The brand name of shoe is "Good Arch" manufacture is Taiwan, size 38.

Nail is used to minimize the repair layer from moving. As the area of coverage is very small.

Trim the edge to match the contour.

Compare before and after repair.

After repair try polish the shoe with a chemical liquid.

KENDA FARBEN chemical products for shoes. Starlux. bright finish for open grain leathers. made in Italy.

= * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * =

Right side of slipper with strap loosen, can see glue mark

Use a punch for marking position to punch with awl tool. Not recommend to use punch tool as the material is not leather material and it looks like sponge material.

Use awl to punch hole thru and needle follows the direction.

This is one way to start tie knot.

Repair done, take note of the thread stitch path.

   👷  End of document 👴