Inform on Leather & Tips #2(Kuala Lumpur)

 Inform on Leather & Tips #2
Visit and shopping at Kuala Lumpur leather craft shop.



You can open an  account with this company to pay on line by transfer from your bank account


second splitter for sale
German made second hand stitching machine for RM 6k

Technician did show demo and stitch our coin  purse


Accessories on sale Chicago screw

New riveter and rivet pin


New glue which is water base and need to store in up side down position

Item purchase for freind


Sample project by technician using the stitching machine











                                            👴       End of document


Leather Button hand press Set (4 piece) #5

           This is another special order for hand press to use for a specific button type and shape.
This button shape ,contour and size is not readily available from current two leather craft shop.
     Hence no choice to get a workshop to fabricate this set of four items.


      


Total cost is RM400.00

                           End of Document 👲

Leather Pairing Knife #4 part ONE

                 NEW tool for leather craft have request a workshop to help fabricate a new paring knife using a new purchase of new knife from COSWAY shop.
             Note the knife have a very special material and steel use a special materials it very sharp and good for leather craft application.
This way the overall cost are reduce from RM 300.00 to less than RM 100.00 and two pairing knife (exclusive to polishing and sharpening).





prepare marking out line of knife sheath


Materials used outer layer is veg tan leather, paper backing material and finally plastic sheet.



Making new sheath cover for knife.















verify cutting edge by cutting lemon skin or leather materials.




               👴  End of document👷 

Non Leather Repair #12 (Table Fan)

 One table fan was moving very slowly and also due for preventive maintenance.


This old fan need regular dirt removal it start acting when the dirt accumulate.


Tools required for preventive maintenance

Remove rear cover of fan to access to use vacuum cleaner and brush

Top view of rear cover remove. Look for oiling hole for both front and rear.

Do take precaution as there is two ball bearing on the swivel turning mechanism


Clean inside rear cover


Re assemble the unit and verify unit status good.











                👴 end of document

Leather Project # 4 (Belt holder mobile phone)

This is a simple leather project for belt holder for mobile phone. The mobile phone is Samsung version J5 without protector.

Front view of finish product

Rear view of end project looks like




























Update on 3rd July.

This are some of step to fabricate this project



Mark the pivot point.



Attached a move able hook on the rear layer. This method will minimize the mobile phone casing being hanging by the hook device.



     End of document  👴






Tote Bag # 6 (Trying out, small size) Part One


    TOTE Bag
           Something new to try out on different design for a tote bag, small size.
Wonder why do you two handle strap, WHY not have one strap only? hence come out this idea.




Add base layer for the bottom of the tote bag. It best to cut the base leather slightly bigger so that the side corner are covered to give better support to tote bag


Mark area that need glue application, however recommend to have an over lap on edge at the base to the side to ensure better grip and also better stitching for the base piece.

Attached a base layer on the inside of tote bag to help get the required shape.


























Compare with other bag design on the bottom side









Update on 16th Oct 2019.

Comparing other tote bag technique


















Some tools required for this part of project to create handle strap. Note I have added a logo tag

Update on 16th Oct 2019.
 Marking place for strap and holder.



Mark area on bag side - Making bag strap D ring for bag


Making bag strap D ring for bag


Making bag strap D ring for bag


Use awl to punch hole on handle pad on tote bag.

                   👲     End of Document  👴

Man shoe repair (stitching sewing) - 男性靴修理(ステッチ縫製)

 This is about my own shoe repair for the outer sole separated... This is a Clarks - Gore-tex . これは、剥がれてしまったアウターソールの靴の修理についてです。これは、クラークスのゴアテ...