Tote Bag # 7 Part 1 (Trying out medium size, round Base)

             Two part series for tote bag with round bottom.

Remove part of the surface for better gluing to the side layer

                              ✋✋ End of document 👴 👷 👶

Tote Bag # 7 Part 2 (Trying out medium size, round Base)

      Trying new design tote bag with round base.

This rare design which does not follow and rule to design and colour match way of doing thing it create a unique design.

Materials for project. The long strip is for the side wall to attach to bigger layer.
Notice have add my logo tag after trimming the edge of logo

Apply glue and wait for the glue to cure on both edge. It is at time we have to be patient to allow sufficient curing before attach two part. This is to ensure the gule take effect and allow easier punch hole. If not there are possibility the two part /layer move around.

Try use the new type of glue it is water base and it is very sticky but odourless. Is it simple to apply

Update on 16th Oct 2019.
Punch hole along edge of bag

Update on 16th Oct 2019.
Punch hole along edge of bag for the curve side

Update on 16th Oct 2019.
Stitching along edge of bag.

Update on 16th Oct 2019.
Inspect stitch work















                         👶  End of document 👴

Coin purse #7 (Request by friend)

  This is a special request by friend who want to use it as coin purse or as their call card holder. It is multiple purpose as it depend on user.

The rear view of the button post with a round pad glue and also stitch for better grip. ( see the logo chop on top)

Rear view of the overall project

Front view of project and with stitching needle and thread

 Tools used for this coin purse project

Stitching start from base

Tools required for project

Update on 1st July 2019.

 Another coin purse in the making.

Tools used for this project

Design with two pocket














            💀💀End of document 👴

Pencil Case project #3

  Make new pencil casing as replacement as the first version design was too short for certain type of pencil. The previous pencil case was only 2 cm shorter and hence some pencil cannot be fitted.

Work around by making a longer pencil case with two pouch seperator

The leather materials chosen was of three different texture and thickness.

use a number #2 beveler for the edge

Measure the flap and where to punch button hole and mount the button.
I use a small metal plate to punch the button.

For the logo tag try to trim the edge for thinner where it is insert in between two layer.

Inert wood base to punch hole for the logo.

Clean and treatment for leather surface before apply gule

Drain cutter

Punch hole for edge

Update on 1st July 2019.

 Compare between two different size pencil case

  Rear view for comparison

This is the gift for a relative, pencil case and cable organizer.

This is one way to ensure the button seal did not move or peel off. After punch hole is the do a stitches.





                        👴  End of document  👀