Leather Project # 8 (Pencil box case) .
Design and fabricate pencil box case using discarded silicon sealant tube.
Ideal length for typical pencil length is about 19 cm and the casing is about 21 cm.
Select a suitable discarded casing from "silicon sealant" and clean both inside and outside it.
Cut off unwanted part and use sand paper to de- blurred after cutting off edge by using sandpaper a sharp knife.
Tips :- use a good support to grip part when perform cutting action.
Design and fabricate pencil box case using discarded silicon sealant tube.
Ideal length for typical pencil length is about 19 cm and the casing is about 21 cm.
Select a suitable discarded casing from "silicon sealant" and clean both inside and outside it.
Tips :- use vice or "V" shape part to hold part.
Sand paper the rough cut edge. This smaller section is for the top cover for pencil box.
Cut leather material to size to match casing project.
please refer to You Tube on how to do cross stitch-
https://www.youtube.com/watch?v=dG-dpt8ZTDk&t=61s
Notice the top cover leather is emboss with pattern.
Tips :- it is easier to emboss pattern before stitching.
Method to stitch the top cover
Open files and set size to match the leather pattern desired.
Recommend to use only computer without touch screen sensor.
This will prevent image movement while doing tracing.
Place tracing paper on top of monitor screen surface and start tracing.
Use tape to hold to leather, however do take note some leather surface is susceptible to cause damage to leather dye colour. So do check first.
Tips is to have tracing paper almost same size of leather materials
Top section of pencil case with emboss flower design.
Sand paper the rough cut edge. This smaller section is for the top cover for pencil box.
Cut leather material to size to match casing project.
please refer to You Tube on how to do cross stitch-
https://www.youtube.com/watch?v=dG-dpt8ZTDk&t=61s
【革の縫い方っ！４】：『クロス・ステッチ-①（cross‐stitch-1）』 レザークラフト動画＜011＞
Tips :- it is easier to emboss pattern before stitching.
Method to stitch the top cover
Open files and set size to match the leather pattern desired.
Recommend to use only computer without touch screen sensor.
This will prevent image movement while doing tracing.
Tips is to have tracing paper almost same size of leather materials
Possible source for design to emboss you can be found on internet.*
Bottom section of pencil case with emboss design.
Possible source for design to emboss you can be found on internet.*
Update on 27th July 2020.
Bottom section of pencil case with emboss design.
Possible source for design to emboss you can be found on internet.*
Update on 27th July 2020.
URL link for pattern to choose for use
1) https://www.justcolor.net/nature/coloring-animals-insects/?image=insectes__coloring-butterfly-beautiful-patterns-3__1
2) https://www.pinterest.com/pin/165014773823898113/
End of document 👴 . . .
2) https://www.pinterest.com/pin/165014773823898113/
End of document 👴 . . .
No comments:
Post a Comment