Key Chain #07 (Key Chain improvement)

Key Chain #07 (Key Chain improvement)

See difference between previous key chain with newer design version.

Compare the older key chain version to current design.

Add an elastic band to hold additional card.

stitch one end of strap, fold the end before stitching to key chain

Add a strap elastic band to hold Touch N Go card

Top view with flap close

Option to add a place to hold key tag item.

Final new version of key chain with 4 head, one key tag hook, Touch N Go card with strap to swipe card at toll plaza.

End of document 👴

Non Leather repair #21 (Sewing machine preventive repair)

Non Leather repair #21 (Sewing machine preventive repair)

More than six month since last preventive maintenance on sewing machine.
Have view some You Tube on what and how to do oiling certain mechanical moving parts.

tools use for this preventive cleaning on sewing machine

Excess fabric struck inside machine

Use a small brush to remove unwanted fabric

View underneath sewing machine and oil moving parts.

Create a simple PM schedule check list.

Sharing some YouTube training video or work instruction.

https://designmycostume.com/

Care and Maintenance
How to Oil Sewing Machines at Home?
A Step by Step Guide

By Jane Elizabeth - February 16, 2018

https://www.sewingmachinelife.com/beginner-info/how-to-oil-a-singer-sewing-machine/

= = = = = = = = = = = = = = = = = = = = = = = = = = = =

HOW TO OIL A SINGER SEWING MACHINE? THE ONLY GUIDE YOU’LL EVER NEED
I still remember the day I decided I wanted to try sewing…
Thousands of questions were running through my head.
How to start?
What to do first?

= = = = = = = = = = = = = = = = = = = = = = = = = = = =

https://www.wikihow.com/Oil-a-Sewing-Machine

How to Oil a Sewing Machine
Author Info | Video Team Tested | References
Updated: March 22, 2020

End of document 👴

Leather Project # 8 (Pencil box case)

Leather Project # 8 (Pencil box case) .

Design and fabricate pencil box case using discarded silicon sealant tube.
Ideal length for typical pencil length is about 19 cm and the casing is about 21 cm.

Select a suitable discarded casing from "silicon sealant" and clean both inside and outside it.

Cut off unwanted part and use sand paper to de- blurred after cutting off edge by using sandpaper a sharp knife.

Tips :- use a good support to grip part when perform cutting action.

Tips :- use vice or "V" shape part to hold part.

Sand paper the rough cut edge. This smaller section is for the top cover for pencil box.

Cut leather material to size to match casing project.

please refer to You Tube on how to do cross stitch-
https://www.youtube.com/watch?v=dG-dpt8ZTDk&t=61s

【革の縫い方っ！４】：『クロス・ステッチ-①（cross‐stitch-1）』　レザークラフト動画＜011＞

Notice the top cover leather is emboss with pattern.

Tips :- it is easier to emboss pattern before stitching.

Method to stitch the top cover

Open files and set size to match the leather pattern desired.
Recommend to use only computer without touch screen sensor.
This will prevent image movement while doing tracing.

Place tracing paper on top of monitor screen surface and start tracing.

Use tape to hold to leather, however do take note some leather surface is susceptible to cause damage to leather dye colour. So do check first.

Tips is to have tracing paper almost same size of leather materials

Top section of pencil case with emboss flower design.

Possible source for design to emboss you can be found on internet.*

Bottom section of pencil case with emboss design.

Possible source for design to emboss you can be found on internet.*

Update on 27th July 2020.

URL link for pattern to choose for use

1) https://www.justcolor.net/nature/coloring-animals-insects/?image=insectes__coloring-butterfly-beautiful-patterns-3__1
2) https://www.pinterest.com/pin/165014773823898113/

End of document 👴 . . .

Leather tools and tips #12 (Stropping Board)

A request from a friend to make a stropping board for him. Use for his kitchen knife.

Leather craft tools and tips #12 (Stropping Board) , specification about 12 inch length and 3 inch width leather materials.

Got a big piece of plywood from crate box. cut to various size for each project.
Hence use circular saw with other "tools" to help cut off.

Tools use for this project , example wood working portable bench, various G clamp size , one long L bracket , marker pen, ruler, vacuum cleaner, dusting brush and etc.

Use a pen to mark offset to cut plywood.

Tips #1 :- Masking tape to cover area cut line to minimise plywood splinting edge.

Tips #2 :- Use aluminium bracket and wood piece to guide circular saw blade.

Overall view on set up to prepare for cutting a straight line with circular saw.

Use circular saw to cut ply wood

Update 2nd May 2020.

After glue both plywood and allowed to cured . Then proceed to cut stropping broad handle shape.

Tools used is copying saw, G clamp, wooden support, vacuum cleaner, pencil and ruler.

Close up view on cut line for handle.

File off the sharp part of the nail, use a small piece of tape to minimise scratch the wooden surface.

View of stropping board with leather material attached

Paint a few layer of acrylic paint to rear section of plywood after sandpaper surface.
Apply paint to all edge of plywood.

Allow for proper drying after apply paint.

UPDATE 8th May 2020