LeatherMan multi function Sheath #2 Part Two

           LeatherMan multi function Sheath #2 Part Two

 Sharing the step to make Leather man sheath.

Apply glue on both leather layer. Allow sufficient time for glue to settle before attached both  layers.

This way to use roller to better glue adhesion between two layer .

Marking edge line with tool before punch hole

This is how to punch hole before stitching after glue harden.

Way to hold punch hole tools.

How the draw line at edge make it easier to for alignment and correct place with punch.
For this case use a wooden block to raise the level so it is easier to punch the edge

Prepare for adding a round layer to which Velcro is attached.
The purpose of rivet is to allow the sheath to move around.

Once rivet is complete attached Velcro (rough side of Velcro)

This is how glue is apply to both layer

This to show sone of the tools required to use.

This is how the stitching pony tool to help in stitching.

Another view of the stitching pony












                      End of Document 👴