Leather project #5 Scissor sheath PART #3 (Friend's scissor sheath try out)
Finally have time to disassemble the original scissor sheath after carefully taking it apart.
* the owner was more than happy to pass this sheath for further analysis and what part that can be improve and add value to his current sheath.
Of course if I think in term of improvement and change is unlimited and idea are abundant.
1) like example the pivot point of attachment,
2) add a more secure sleeve to minimize sharp point tools to pork thru at the tips,
3) how to fabricate a user friendlier and ease to keep and retrieve.
4) New idea for user to enjoy what other tools holder to add
Tools used to disassemble this sheath.
This original sheath is made in Japan as per end user description.
It looks very well fabricate and this sheath was in used for several years.
This owner have try it best to maintain condition, however due to wear and tear, it need to re condition to it best on my ability.
There are some cotton wool like fabric to protect inner layer. This is just a guessing game..
After removing original thread the owner handyman repair with small Gage wire. As he felt the easiest repair and what was available at that time and lasting effect by wire
Next to clean the leather layer and see how best to restore this sheath.
To be continue later, after some research to good method to restore to it original condition base on my best ability.
Please watch for more update... thank you for your support.
End of Document.... 👴👲👷👶
Finally have time to disassemble the original scissor sheath after carefully taking it apart.
* the owner was more than happy to pass this sheath for further analysis and what part that can be improve and add value to his current sheath.
Of course if I think in term of improvement and change is unlimited and idea are abundant.
1) like example the pivot point of attachment,
2) add a more secure sleeve to minimize sharp point tools to pork thru at the tips,
3) how to fabricate a user friendlier and ease to keep and retrieve.
4) New idea for user to enjoy what other tools holder to add
Tools used to disassemble this sheath.
This original sheath is made in Japan as per end user description.
It looks very well fabricate and this sheath was in used for several years.
This owner have try it best to maintain condition, however due to wear and tear, it need to re condition to it best on my ability.
There are some cotton wool like fabric to protect inner layer. This is just a guessing game..
After removing original thread the owner handyman repair with small Gage wire. As he felt the easiest repair and what was available at that time and lasting effect by wire
Next to clean the leather layer and see how best to restore this sheath.
To be continue later, after some research to good method to restore to it original condition base on my best ability.
Please watch for more update... thank you for your support.
End of Document.... 👴👲👷👶
No comments:
Post a Comment