WET Form Leather project #4 Scissor sheath. Use a goat leather for the top layer and 3 mm veg tan leather as bottom layer.
Tools used for this project
Rear view of the project. The inside is several layer to support the difference in height due to the screw and nut used by scissor.
You will notice the center is stitches to hold the inner layer support material.
Allow the leather to dry and take shape.
To be continue .. please wait.
Update on 19th July 2019.
Stitching and use the half method. This method do not cover the complete stitch but instead Half way stitch, this way the total thread length is more manageable.
π΄π²πΆ End of document
Tools used for this project
Rear view of the project. The inside is several layer to support the difference in height due to the screw and nut used by scissor.
You will notice the center is stitches to hold the inner layer support material.
Allow the leather to dry and take shape.
To be continue .. please wait.
Update on 19th July 2019.
Stitching and use the half method. This method do not cover the complete stitch but instead Half way stitch, this way the total thread length is more manageable.
π΄π²πΆ End of document
No comments:
Post a Comment