Dyson Accessory Fluffy Head Cleaning - ダイソン アクセサリー Fluffy ヘッドのクリーニング

 Dyson Accessory Fluffy Head Cleaning

This is how we clean a Dyson accessory fluffy head device, which is clog off with fine dirt and suck up any items like paper, plastic pieces. 

Had reviewed a few YOU Tube video, refer to some of URL link below.

There are some very useful tips, helpful instruction on disassemble and reassemble video. Please view them for more details.

ダイソン アクセサリー Fluffy ヘッドのクリーニング

これは、細かい汚れが詰まり、紙やプラスチックの破片などのアイテムを吸い込むダイソンのアクセサリーのふわふわヘッドデバイスを掃除する方法です。

いくつかの YOU Tube ビデオをレビューしました。以下の URL リンクの一部を参照してください。

非常に役立つヒントや、分解と再組み立てに関する役立つ説明ビデオがいくつかあります。 詳細については、それらをご覧ください。

Before cleaning , a lot of dirt and item stuck at the roller path. Both fluffy roller front and rear is dirty

Close up view before cleaning.

Another close up view before cleaning.

Due to dirt clog hole for proper suction it can restrict air flow for better suction.

Hence it is recommend to do regular cleaning on the fluffy head and minimize damage.

I find it good to use an old toothbrush and soft brush to clean the fluffy roller surface.

After cleaning done and test run..so far the fluffy roller have improve suction.

=== === === === === === === === === === === ===

https://www.youtube.com/watch?v=4LtgNAmOCWU&t=192s

How to clean and maintain the Dyson V8 Cordless Vacuum Cleaner

1,789,976 views                28 Oct 2016         By Lords Electrical ( 8:33 minutes)

This video shows you how to clean the Dyson V8 Absolute / Animal / Fluffy / Total Clean cordless vacuum cleaner.

To order a new filter visit here :http://amzn.to/2zjKhVK.

Please refer to time stamp (for cleaning accessory)

2:29 to 4:03 - When it comes to the accessories these are important keep clean as the main vacuum cleaner.

=== === === === === === === === === === === ===

https://www.youtube.com/watch?v=ZZ-jbDlP07o

 DYSON V8 SOFT ROLLER - deep cleaning

77,546 views                      4 Mar 2020                          By BADASS Crafts ( 32:42 minutes)

 Amazone Affiliat Links :

 https://amzn.to/3kfbJuQ -- Feinmechaniker Werkzeugset

https://amzn.to/3tNMjIb -- Dyson Staubsauger

https://amzn.to/3AkUC0l -- WD40 Angebot

 Hello everyone

in this video I show you how I completely disassemble and clean my extremely dirty hard floor attachment (soft roller) of my Dyson V8 vacuum cleaner. The battery lasted as long as usual after cleaning and the suction result was also significantly better. I am very satisfied with the Dyson v8 and do regular maintenance on my vacuum cleaner to maximize its service life. In this video I would like to share my cleaning experiences with you. I hope you find the video useful in some way. Have fun watching and see you next time! Best regards

 #dyson #v8 #deep #cleaning #perfect

=== === === === === === === === === === === ===

https://www.youtube.com/watch?v=Ymy_B5_rIRM

OPEN ME UP! Dyson V11, V10, V8 and V7 Fluffy Head Disassembly and Clean

300,323 views  22 Feb 2019  By OPEN ME UP  (17:23 minutes)

How to disassemble and clean Dyson V11, V10 V8 and V7 fluffy head.

=== === === === === === === === === === === ===

https://www.youtube.com/watch?v=LY-SasSAUls

Dyson V7/V8/V10/V11 Soft Roller Cleaner Head Refurbishment

6,800 views  26 Oct 2020  By Ricky AR (12:40 minutes)

My Dyson V8 soft roller cleaner head blue tube was broken and motor bearing was damaged. If buy a new one, it cost HK$1,480. Throw the old one seem not protect the environment and Dyson accessories are too expensive. So refurbish my V8 soft roller cleaner head by replacing the blue tube, motor bearing and small strip velvet. It cost around HK$250 and wish it can extend the life of it for one more year.

#DysonV8 #SoftRollerCleanerHead

=== === === === === === === === === === === ===

https://www.youtube.com/watch?v=CYedK1WfxeY

 Vacuum Repairman shows how to take apart the Dyson soft roller head to clean properly!

3,431 views                                     15 Aug 2021                      by richardsvacuumcenter (10:02 minutes)

 I do this for a living so if you found this helpful and care to chip in a few bucks as a thank you paypal me magnuson.brett@gmail.com

Other related article on Dyson product repair.

Dyson vacuum cleaner repair – post on 27^th June 2021

Non Leather repair #23 (Dyson V11 vacuum cleaner) – post on 27^th Aug 2020

                                           End of document 😎

Wooden beads car seat mat/cover repair

 Wooden bead car seat mat/cover repair.

Due to normal wear and tear some of the lines are broken on wooden bead mat /cover.

This resulted in loose wooden beads falling off.

*** Tips:- It best to take note NOT to remove any broken line immediately, so it save some time during repair work. Because if the bead drop off or move away when try to remove them. It will be more time consuming to rearrange the bead to its original position.

Do take note this wooden bead was repaired long time ago, hence some of the beads was broken and missing.

Due to lack of skill and experience during previous repair some of the beads position being ‘alerted’ and it original position looks odd and it is not flat in certain section of seat cover.

The new line is a fishing line of 0.7 mm and 50 lbs specification.

 

The repair strategy is three sections.

1.       First to repair all broken lines for the top taper section, this to restring broken line and bring the bead into position and hold them in desired location.

2.       Next repair is for all broken lines for the bottom section, by re string broken line, add a new line horizontally for the beads.

3.      Finally, match and close gap between the top section and bottom section. Add a new support vertical line between top section and bottom section.

Resource link

Part 1: Basic of bead mat work : making car seat mat by Rinki’s channel (5:14)

Part 2: Bead mat car seat cover: Adding more beads to next line . by Rinki’s channel (5:26 )

Part3: Bead mat car seat cover: Reducing beads in next line : By Rinki’s channel (3:50 )

Cool Dat Azz beaded seat repair using the Albright knot. By cool Dat Azz (29:01)

https://www.carsales.com.au/editorial/details/car-hack-how-to-make-your-own-beaded-seat-covers-109015/

Marking the bead to use as reference when do re string process

Comparing the broken line cause a big gap in between.

How to insert line into bead. at time it helps by carrying the bead

it easier to restring bead. At time if not possible use a tweezers to help. 

This is to show how one line is terminate before moving to another bead in line.

Use own wire tool to insert into bead to minimize movement when do re string line.

This is how the original string line are run.

Once the top and bottom section of wooden bead is re string and verify the next step to close the gap between them

The top section bead are align slowly and move closer to the bottom section.

The final step is to reinforce the top and bottom section is run a line from top to bottom .

This spine line to support the weight of the two section to be held in place. Hope it will help to support all beads in it position.

The last step is to installed on the car seat. ( see the above picture with Before and After repair).

 End of document 😎