Dyson vacuum cleaner repair

 Dyson vacuum cleaner repair

  This Dyson V10 vacuum cleaner was defective with it trigger button stuck and button recess position.

User not able to press the trigger button as it is flash with handle. 

Base on various input the main reason is the plastic trigger mechanism is broken. This resulted in the battery is not turn on.

*** Note:- this type of repair will be best attempt by personnel with background on electrical and electronic, repair experience and knowledge. However if you feel comfortable to try after viewing the YouTube video and have the necessary tools and skill please proceed with caution. As some of the parts are SMT device and fragile connectors and cables.

Saw some useful and interesting  repair video tips from You Tube with related to same issue I encountered for this Dyson vacuum cleaner. I also viewed these video to get some tips on repair related to trigger button failure.

Also learn this vacuum cleaner have know defect on the design of the trigger plastic, there was some comments regards to this matter.

Sharing some url link to You Tube site.

https://www.youtube.com/watch?v=Mmz54gocIq8

Dyson V10 V11 Complex (Defect) Trigger Disassembly / Modification

 •28 Jun 2020 J D   (08:04 minutes)

 I was having an ON/OFF problem with the trigger on my Dyson V11 Torque.  Either the actuator switch on the battery was too tall, or the trigger pin on the handle was too long!

I created this video to show the more complex disassembly and modification or the trigger "leg" to allow more travel on the trigger pin.

NOTE:  Keep in mind, any visible alterations/mods made to these vacuums (while under warranty) ... will most definitely void your warranty.  Always proceed at your own risk and level of comfort while working with electronics, and remove the battery first!

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = = = = = = = = = = = = =

https://www.youtube.com/watch?v=dnptF_fuYwA

Dyson V11/V10 - How to fix trigger problem (trigger broken, gâchette cassé)

•25 Nov 2020 Adrien H   (18:35 minutes)

 Let me show you how to fix the broken trigger with Dyson V11 standard/absolute or V10. 

Complete video disassembly and reassembly.

 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = = = = = = = = = = = = =

https://www.youtube.com/watch?v=PlurUXWUXAg

How To Fix A Broken Trigger On A Dyson V11 Animal

 •22 Feb 2021 The Way We Do It  (8:09 minutes)

 eBay seller of the trigger

Tovhash

https://www.ebay.com/usr/tovhash?_trk...

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = = = = = = = = = = = = =

https://www.youtube.com/watch?v=EYrQ2c0pGc8

OPEN ME UP! Dyson V11 and V10 COMPLEX Disassembly and Clean

 •7 Feb 2020 OPEN ME UP  (30:05 minutes)

 this is a COMPLEX video to show you how to clean and disassemble your dyson V10 and V11 vacuum. This will allow you to clean the vacuum 100%. Do not attempt until you watch the whole thing. There is a SIMPLE version of this video on my channel which is recommended

                                 End of document 👴

Shoe repair #1 (Scholl)

               This is about own shoe repair (old shoe design SCHOLL). 

Both right and left outer sole is worn off and some part with big crack line. While the inner sole of shoe have worn off lining and in sole is worn off and certain part of padding layer some is torn and broken.

These are the defects..👀

First remove the in sole materials from shoe.  1) Bottom layer 2) Heel layer 3) Inner sole layer 4) Leather inner sole layer

Next take measurement on all layer of in sole so that the new material thickness almost the same as the original.

 👶   End of document  👴